[Sep 29, 2022] Get New 300-715 Certification Practice Test Questions Exam Dumps
Real 300-715 Exam Dumps Questions Valid 300-715 Dumps PDF
Difficulty in Attempting Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
Our Cisco 300-715 practice exam has been duly prepared by the team of experts after an in-depth analysis of Cisco recommended syllabus. We update our material regularly. So, it is intended to keep candidates updated because as and when Cisco will announce any changes in the material; we will update the material right away. After practicing with our Cisco 300-715 exam dumps candidate can pass Cisco 300-715 exam with good grades. We recommend CISCO 300-715 practice exams for the exam preparation. TestPassed CISCO 300-715 practice exams will help with your goals.
How to Prepare for Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
Preparation Guide for Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
Introduction for Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
The Implementing and Configuring Cisco Identity Services Engine v1.0 (SISE 300-715) exam is a 90-minute exam associated with the CCNP Security, and Cisco Certified Specialist - Security Identity Management Implementation certifications. This exam tests a candidate's knowledge of Cisco Identify Services Engine, including architecture and deployment, policy enforcement, Web Auth and guest services, profiler, BYOD, endpoint compliance, and network access device administration. The contents of CISCO 300-715 practice exam and CISCO 300-715 practice exams prepared by experts will help the candidates to prepare for this exam.
This exam tests your knowledge of Cisco Identify Services Engine, including:
- Policy enforcement
- Architecture and deployment
- Network access device administration
- Profiler
- Web Auth and guest services
- BYOD
To fully benefit from this exam, you should have the following knowledge:
- Familiarity with 802.1X
- Introduction to 802.1X Operations for Cisco Security Professionals (802.1X)
- Familiarity with Microsoft Windows operating systems
- Familiarity with the Cisco IOS® Software Command-Line Interface (CLI)
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Web Auth and guest services
The following will be discussed in CISCO 300-715 exam dumps:
- Configure policies including authentication and authorization profiles
- Implement MAB
- Configure network access devices
- Closed mode
- Low impact
- Configure 802.1X phasing deployment
- Monitor mode
NEW QUESTION 109
What is a requirement for Feed Service to work?
- A. Cisco ISE has access to an internal server to download feed update.
- B. TCP port 8080 must be opened between Cisco ISE and the feed server.
- C. Cisco ISE has a base license.
- D. Cisco ISE has Internet access to download feed update.
Answer: A
Explanation:
Section: Architecture and Deployment
NEW QUESTION 110
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? ()
- A. new AD user 802 1X authentication
- B. BYOD
- C. posture
- D. guest AUP
- E. hotspot
Answer: A,C
NEW QUESTION 111
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access.
The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use context visibility to verify posture status.
- B. Use the identity group to validate the authorization rules.
- C. Use the endpoint ID to execute a session trace.
- D. Use traceroute to ensure connectivity.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide
NEW QUESTION 112
An administrator needs to give the same level of access to the network devices when users are logging into them using TACACS+ However, the administrator must restrict certain commands based on one of three user roles that require different commands How is this accomplished without creating too many objects using Cisco ISE?
- A. Create one shell profile and one command set.
- B. Create multiple shell profiles and multiple command sets.
- C. Create multiple shell profiles and one command set
- D. Create one shell profile and multiple command sets.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_g
https://www.youtube.com/watch?v=IlZwB71Szog ab_channel=JasonMaynard
NEW QUESTION 113
In a standalone Cisco ISE deployment, which two personas are configured on a node? (Choose two.)
- A. subscriber
- B. policy service
- C. administration
- D. primary
- E. publisher
Answer: B,C
Explanation:
Section: Architecture and Deployment
NEW QUESTION 114
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access. The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use context visibility to verify posture status.
- B. Use the identity group to validate the authorization rules.
- C. Use the endpoint ID to execute a session trace.
- D. Use traceroute to ensure connectivity.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_011001.html#concept_87916A77E8774545B36D0BB422429596
NEW QUESTION 115
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication sessions mac 000e.84af.59af details
- B. show authentication registrations
- C. show authentication sessions method
- D. show authentication interface gigabitethemet2/0/36
Answer: A
NEW QUESTION 116
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. RADIUS probe
- B. DNS probe
- C. DHCP SPAN probe
- D. NetFlow probe
- E. SNMP query probe
Answer: A,E
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION 117
Which two external identity stores support EAP-TLS and PEAP-TLS? (Choose two.)
- A. LDAP
- B. RADIUS Token
- C. Internal Database
- D. RSA SecurlD
- E. Active Directory
Answer: A,E
NEW QUESTION 118
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. dot1x system-auth-control
- B. ip device tracking
- C. radius server vsa sand authentication
- D. aaa authorization auth-proxy default group radius
- E. radius-server attribute 8 include-in-access-req
Answer: C,E
NEW QUESTION 119
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out Which configuration is causing this behavior?
- A. One of the nodes is an active PSN.
- B. All of the nodes are actively being synched.
- C. All of the nodes participate in the PAN auto failover.
- D. One of the nodes is the Primary PAN
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_deployment.html#ID185
NEW QUESTION 120
Which two actions occur when a Cisco ISE server device administrator logs in to a device? (Choose two)
- A. The device queries the external identity store
- B. The Cisco ISE server queries the internal identity store
- C. The device queries the internal identity store
- D. The device queries the Cisco ISE authorization server
- E. The Cisco ISE server queries the external identity store.
Answer: C,E
NEW QUESTION 121
A network engineer must enforce access control using special tags, without re-engineering the network design. Which feature should be configured to achieve this in a scalable manner?
- A. VLAN
- B. RBAC
- C. dACL
- D. SGT
Answer: D
NEW QUESTION 122
An engineer is configuring the remote access VPN to use Cisco ISE for AAA and needs to conduct posture checks on the connecting endpoints After the endpoint connects, it receives its initial authorization result and continues onto the compliance scan What must be done for this AAA configuration to allow compliant access to the network?
- A. Ensure that authorization only mode is not enabled
- B. Enable dynamic authorization within the AAA server group
- C. Fix the CoA port number
- D. Configure the posture authorization so it defaults to unknown status
Answer: B
NEW QUESTION 123
Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal?
- A. Random
- B. Known
- C. Daily
- D. Monthly
- E. Imported
Answer: A,E
NEW QUESTION 124
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Server Sequence
- B. Command Sets
- C. Device Admin Service
- D. External TACACS Servers
- E. Device Administration License
Answer: C,E
NEW QUESTION 125
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. Network Access Control
- B. Supplicant Provisioning Wizard
- C. My Devices Portal
- D. Application Visibility and Control
Answer: B
NEW QUESTION 126
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Server Sequence
- B. Command Sets
- C. External TACACS Servers
- D. Device Administration License
- E. Enable Device Admin Service
Answer: D,E
NEW QUESTION 127
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node.
Which persona should be configured with the largest amount of storage in this environment?
- A. Platform Exchange Grid
- B. Primary Administration
- C. policy Services
- D. Monitoring and Troubleshooting
Answer: D
NEW QUESTION 128
Which interface-level command is needed to turn on 802 1X authentication?
- A. dot1x system-auth-control
- B. authentication host-mode single-host
- C. aaa server radius dynamic-author
- D. Dofl1x pae authenticator
Answer: A
NEW QUESTION 129
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the endpoints on the network.
Which node should be used to accomplish this task?
- A. pxGrid
- B. policy service
- C. monitoring
- D. primary policy administrator
Answer: B
Explanation:
Section: Profiler
NEW QUESTION 130
An administrator needs to connect ISE to Active Directory as an external authentication source and allow the proper ports through the firewall. Which two ports should be opened to accomplish this task? (Choose two)
- A. HTTPS 443
- B. MSRPC 445
- C. LDAP 389
- D. TELNET 23
- E. HTTP 80
Answer: B,C
NEW QUESTION 131
Which use case validates a change of authorization?
- A. An authenticated, wired EAP-capable endpoint is discovered
- B. An endpoint that is disconnected from the network is discovered
- C. An endpoint profiling policy is changed for authorization policy.
- D. Endpoints are created through device registration for the guests
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html
NEW QUESTION 132
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. user-presented certificate and a certificate stored in Active Directory
- B. subject alternative name and the common name
- C. user-presented password hash and a hash stored in Active Directory
- D. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
Answer: B
Explanation:
Explanation
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user.
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION 133
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?
- A. The groups are not added to Cisco ISE under the AD join point
- B. The groups are present but need to be manually typed as conditions
- C. Cisco ISE only sees the built-in groups, not user created ones
- D. Cisco ISE's connection to the AD join point is failing
Answer: A
Explanation:
Explanation
https://www.youtube.com/watch?v=0kuEZEo564s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 134
......
300-715 Exam Dumps - PDF Questions and Testing Engine: https://www.testpassed.com/300-715-still-valid-exam.html
Latest 300-715 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=14JeQc4aX4rWFerkIainxyw3TdQePkhsM