2022 Updated 300-715 PDF for the 300-715 Tests Free Updated Today!
Fully Updated Dumps PDF - Latest 300-715 Exam Questions and Answers
Exam Details
Cisco 300-715 is a timed and proctored exam delivered in a secured environment. The applicants can take it in-person at any Pearson VUE testing center (there are a lot of such centers all over the world) or as an online exam from the comfort of their homes or offices. It has the time frame of 90 minutes and is available in the English language only. This test includes about 55-65 questions. The approximate passing score for this exam is around 750-850 points on a scale of 1000. The regular fee is $300.
It is possible to schedule the exam day in advance (up to six weeks) or on the same day. After the completion of the test, the individuals will get information about their scores. In addition, within twenty-four hours, Cisco will send an email with recommendations for the next steps. Those who do not achieve the passing score will be required to retake the 300-715 exam. This process is available five days after the failed attempt. It is recommended that the professionals gain competence and expertise in the domains of the test before attempting it to improve their performance and increase chances to get the pass mark.
NEW QUESTION 67
What is a requirement for Feed Service to work?
- A. Cisco ISE has access to an internal server to download feed update
- B. Cisco ISE has a base license.
- C. TCP port 3080 must be opened between Cisco ISE and the feed server
- D. Cisco ISE has Internet access to download feed update
Answer: A
NEW QUESTION 68
An administrator is configuring a new profiling policy in Cisco ISE for a printer type that is missing from the profiler feed The logical profile Printers must be used in the authorization rule and the rule must be hit. What must be done to ensure that this configuration will be successful^
- A. Enable the EndPoints:EndPointPolicy condition in the authorization policy.
- B. Add the new profiling policy to the logical profile Printers.
- C. Modify the profiler conditions to ensure that it goes into the correct logical profile
- D. Create a new logical profile for the new printer policy
Answer: A
NEW QUESTION 69
A company is attempting to improve their BYOD policies and restrict access based on certain criteri a. The company's subnets are organized by building. Which attribute should be used in order to gain access based on location?
- A. device registration status
- B. IP address
- C. MAC address
- D. static group assignment
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html#ID1353
NEW QUESTION 70
If a user reports a device lost or stolen, which portal should be used to prevent the device from accessing the network while still providing information about why the device is blocked?
- A. Guest
- B. Blacklist
- C. BYOD
- D. Client Provisioning
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/Managing_Lost_or_Stolen_Device.html#90273 The Blacklist identity group is system generated and maintained by ISE to prevent access to lost or stolen devices. In this design guide, two authorization profiles are used to enforce the permissions for wireless and wired devices within the Blacklist:
Blackhole WiFi Access
Blackhole Wired Access
NEW QUESTION 71
What must be configured on the Cisco ISE authentication policy for unknown MAC addresses/identities for successful authentication?
- A. drop
- B. pass
- C. reject
- D. continue
Answer: D
Explanation:
Reference:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_id_stores.html
NEW QUESTION 72
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8905
- B. TCP 8909
- C. TCP 443
- D. UDP 1812
Answer: B
NEW QUESTION 73
A network administrator is setting up wireless guest access and has been unsuccessful in testing client access. The endpoint is able to connect to the SSID but is unable to grant access to the guest network through the guest portal. What must be done to identify the problem?
- A. Use traceroute to ensure connectivity.
- B. Use context visibility to verify posture status.
- C. Use the endpoint ID to execute a session trace.
- D. Use the identity group to validate the authorization rules.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_011001.html#concept_87916A77E8774545B36D0BB422429596
NEW QUESTION 74
An engineer is configuring 802.1X and is testing out their policy sets. After authentication, some endpoints are given an access-reject message but are still allowed onto the network. What is causing this issue to occur?
- A. The authorization results for the endpoints include the Trusted security group tag.
- B. The authorization results for the endpoints include a dACL allowing access.
- C. The switch port is configured with authentication event server dead action authorize vlan.
- D. The switch port is configured with authentication open.
Answer: D
NEW QUESTION 75
An engineer is configuring posture assessment for their network access control and needs to use an agent that supports using service conditions as conditions for the assessment. The agent should be run as a background process to avoid user interruption but when it is run. the user can see it. What is the problem?
- A. The user was in need of remediation so the agent appeared m the notifications
- B. The posture module was deployed using the headend instead of installing it with SCCM
- C. The engineer is using the "Anyconnect" posture agent but should be using the "Stealth Anyconnect posture agent
- D. The proper permissions were no! given to the temporal agent to conduct the assessment
Answer: C
NEW QUESTION 76
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out Which configuration is causing this behavior?
- A. All of the nodes participate in the PAN auto failover.
- B. All of the nodes are actively being synched.
- C. One of the nodes is an active PSN.
- D. One of the nodes is the Primary PAN
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_deployment.html#ID185
NEW QUESTION 77
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?
- A. Cisco ISE only sees the built-in groups, not user created ones
- B. The groups are not added to Cisco ISE under the AD join point
- C. The groups are present but need to be manually typed as conditions
- D. Cisco ISE's connection to the AD join point is failing
Answer: B
Explanation:
Explanation
https://www.youtube.com/watch?v=0kuEZEo564s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 78
Refer to the exhibit.
Which two configurations are needed on a catalyst switch for it to be added as a network access device in a Cisco ISE that is being used for 802 1X authentications? (Choose two )
- A. Option B
- B. Option A
- C. Option E
- D. Option D
- E. Option C
Answer: B,E
NEW QUESTION 79
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.
Answer:
Explanation:
Explanation
https://www.mbne.net/tech-notes/aaa-tacacs-radius
NEW QUESTION 80
An administrator connects an HP printer to a dot1x enable port, but the printer in not accessible Which feature must the administrator enable to access the printer?
- A. TACACS authentication
- B. MAC authentication bypass
- C. RADIUS authentication
- D. change of authorization
Answer: B
Explanation:
https://community.cisco.com/t5/network-access-control/ise-for-printer-security/m-p/3933216
NEW QUESTION 81
A Cisco ISE administrator needs to ensure that guest endpoint registrations are only valid for one day When testing the guest policy flow, the administrator sees that the Cisco ISE does not delete the endpoint in the Guest Endpoints identity store after one day and allows access to the guest network after that period. Which configuration is causing this problem?
- A. The Guest Account Purge Policy is set to 15 days
- B. The length of access is set to 7 days in the Guest Portal Settings
- C. The RADIUS policy set for guest access is set to allow repeated authentication of the same device
- D. The Endpoint Purge Policy is set to 30 days for guest devices
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01101.html#:~:text=Cisco%20ISE%2C%20by%20default%2C%20deletes,5000%20endpoints%20every%20three%20minutes.
NEW QUESTION 82
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 83
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. DHCP SPAN probe
- B. RADIUS probe
- C. SNMP query probe
- D. NetFlow probe
- E. DNS probe
Answer: B,C
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION 84
......
Free 300-715 Exam Questions 300-715 Actual Free Exam Questions: https://www.testpassed.com/300-715-still-valid-exam.html
100% Free 300-715 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1kKN_Jb-FkE53fPF2hJ4cWoJQX_kyzxkt