300-715 Practice Test Questions Answers Updated 153 Questions
300-715 dumps & CCNP Security Sure Practice with 153 Questions
More about 300-715 Evaluation
The Cisco 300-715 test is categorized among other concentration tests where you only have to pass one. You select and take it after clearing the core exam called 350-701. With exam 300-715, each candidate has 1.5 hours to comprehensively answer all the questions presented to him or her. Listed below are the exam domains:
- Profiler;
- Endpoint compliance;
- Device administration for network access.
- Architecture & deployment;
- BYOD;
- Web authentication & guest services;
Please note, other topics might be covered in the final exam but the above-listed are the commonly tested areas. If you intend to sit for 300-715 exam, enroll in the ‘Implementing and Configuring Cisco ISE’ course to help you prepare. Study guides also make great sources of information about the real test.
Cisco 300-715 is a qualifying and concentration test for the CCNP Security certificate. The applicants must pass it along with the core exam to earn this professional-level certification. At the same time, the specialists who ace this test will also obtain the Cisco Certified Specialist – Security Identity Management Implementation certificate. This exam is designed to evaluate the individuals’ knowledge of Cisco Identity Service Engine. The area of coverage includes deployment & architecture, web auth and guest services, profiler, policy enforcement, network access for device administration, BYOD, and endpoint compliance, among others.
Difficulty in Attempting Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
Our Cisco 300-715 practice exam has been duly prepared by the team of experts after an in-depth analysis of Cisco recommended syllabus. We update our material regularly. So, it is intended to keep candidates updated because as and when Cisco will announce any changes in the material; we will update the material right away. After practicing with our Cisco 300-715 dumps candidate can pass Cisco 300-715 exam with good grades. We recommend CISCO 300-715 practice tests for the exam preparation. TestPassed CISCO 300-715 practice exams will help with your goals.
NEW QUESTION 85
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. Supplicant Provisioning Wizard
- B. Application Visibility and Control
- C. Network Access Control
- D. My Devices Portal
Answer: D
NEW QUESTION 86
A customer wants to set up the Sponsor portal and delegate the authentication flow to a third party for added security while using Kerberos Which database should be used to accomplish this goal?
- A. RSA Token Server
- B. Local Database
- C. Active Directory
- D. LDAP
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/admin_guide/b_ise_admin_guide_26/b_ise_admin_guide_26_chapter_01111.html#concept_srz_bkb_4db
NEW QUESTION 87
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 88
In which two ways can users and endpoints be classified for TrustSec?
(Choose Two.)
- A. QoS
- B. VLAN
- C. SGACL
- D. SXP
- E. dynamic
Answer: B,E
NEW QUESTION 89
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The network devices ports are shut down.
- B. The certificate checks are not being conducted.
- C. The AD join point is no longer connected.
- D. The AD DNS response is slow.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_2x.html#ID612
NEW QUESTION 90
An administrator is attempting to replace the built-in self-signed certificates on a Cisco ISE appliance. The CA is requesting some information about the appliance in order to sign the new certificate. What must be done in order to provide the CA this information?
- A. Generate the CSR.
- B. Download the intermediate server certificate.
- C. Install the Root CA and intermediate CA.
- D. Download the CA server certificate.
Answer: A
NEW QUESTION 91
Which two features must be used on Cisco ISE to enable the TACACS. feature? (Choose two)
- A. Device Admin Service
- B. Server Sequence
- C. External TACACS Servers
- D. Device Administration License
- E. Command Sets
Answer: C
NEW QUESTION 92
Which Cisco ISE service allows an engineer to check the compliance of endpoints before connecting to the network?
- A. nexpose
- B. posture
- C. personas
- D. qualys
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Posture is a service in Cisco Identity Services Engine (Cisco ISE) that allows you to check the state, also known as posture, of all the endpoints that are connecting to a network for compliance with corporate security policies. This allows you to control clients to access protected areas of a network.
NEW QUESTION 93
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings
Step 5
Click Save to save the node configuration.
NEW QUESTION 94
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. ip device tracking
- B. aaa authorization auth-proxy default group radius
- C. radius-server attribute 8 include-in-access-req
- D. radius server vsa sand authentication
- E. dot1x system-auth-control
Answer: A,D
NEW QUESTION 95
An engineer is configuring Cisco ISE to reprofile endpoints based only on new requests of INIT-REBOOT and SELECTING message types.
Which probe should be used to accomplish this task?
- A. RADIUS
- B. DHCP
- C. DNS
- D. NMAP
Answer: B
Explanation:
Section: Profiler
NEW QUESTION 96
When planning for the deployment of Cisco ISE, an organization's security policy dictates that they must use network access authentication via RADIUS. It also states that the deployment provide an adequate amount of security and visibility for the hosts on the network. Why should the engineer configure MAB in this situation?
- A. MAB provides the strongest form of authentication available.
- B. The Cisco switches only support MAB.
- C. MAB provides user authentication.
- D. The devices in the network do not have a supplicant.
Answer: D
NEW QUESTION 97
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. NetFlow probe
- B. SNMP query probe
- C. DNS probe
- D. DHCP SPAN probe
- E. RADIUS probe
Answer: B,E
Explanation:
Reference:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION 98
What is needed to configure wireless guest access on the network?
- A. Captive Portal Bypass turned on
- B. WEBAUTH ACL for redirection
- C. endpoint already profiled in ISE
- D. valid user account in Active Directory
Answer: A
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference:
NEW QUESTION 99
An engineer is configuring web authentication using non-standard ports and needs the switch to redirect traffic to the correct port. Which command should be used to accomplish this task?
- A. permit tcp any any eq <port number>
- B. aaa group server radius proxy
- C. aaa group server radius
- D. ip http port <port number>
Answer: D
NEW QUESTION 100
An administrator is adding a switch to a network that is running Cisco ISE and is only for IP Phones. The phones do not have the ability to auto switch port for authentication?
- A. enable network-authentication
- B. dot1x system-auth-control
- C. enable bypass-MAC
- D. mab
Answer: B
NEW QUESTION 101
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. DHCP
- B. RADIUS
- C. NetFlow
- D. SNMP
- E. HTTP
Answer: A,B
Explanation:
Explanation
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide
NEW QUESTION 102
An administrator is configuring cisco ISE lo authenticate users logging into network devices using TACACS+ The administrator is not seeing any or the authentication in the TACACS+ live logs. Which action ensures the users are able to log into the network devices?
- A. Enable the device administration service in the Administration persona
- B. Enable the device administration service in the PSN persona.
- C. Enable the service sessions in the PSN persona.
- D. Enable the session services in the administration persona
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_ise_tacacs_device_admin.html
NEW QUESTION 103
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. DHCP
- B. RADIUS
- C. NetFlow
- D. SNMP
- E. HTTP
Answer: A,B
Explanation:
Reference:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION 104
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. NetFlow probe
- B. SNMP query probe
- C. DNS probe
- D. DHCP SPAN probe
- E. RADIUS probe
Answer: B,E
NEW QUESTION 105
......
New 300-715 Exam Questions| Real 300-715 Dumps: https://www.testpassed.com/300-715-still-valid-exam.html
Get New 300-715 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1CIYAwNbPmUURt1E5uLBPXL-CJOaDwtNr