350-601 Exam Dumps - Try Best 350-601 Exam Questions from Training Expert TestPassed
Practice Examples and Dumps & Tips for 2023 Latest 350-601 Valid Tests Dumps
Cisco 350-601 Exam is a computer-based exam that comprises around 90-110 questions that can be answered in three hours. 350-601 exam can be taken in-person at a Cisco testing center or online through the Pearson VUE platform. It is a closed-book exam, meaning that candidates are not allowed to use any reference materials during the exam.
Cisco 350-601 exam is a prerequisite for several Cisco certifications, including the Cisco Certified Network Professional Data Center (CCNP Data Center) and the Cisco Certified Internetwork Expert Data Center (CCIE Data Center). By passing 350-601 exam, candidates can demonstrate their expertise in data center technologies and enhance their career prospects.
Cisco 350-601 exam is an essential certification test for professionals who want to advance their careers in data center technologies. 350-601 exam validates an individual's skills and knowledge in implementing and managing data center technologies, and it opens up a wide range of career opportunities. Passing the exam requires dedication and hard work, but the rewards are well worth the effort.
NEW QUESTION # 105
A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:
*The customer's security requirements mandate the use of SSH transport.
*No extra software must be installed on the managed systems.
*The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.
Which solution meets these requirements?
- A. PowerShell
- B. Ansible
- C. Puppet
- D. Chef
Answer: B
NEW QUESTION # 106
An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and wants to enable microsegmentation based on vCenter VM attributes. Which statement about microsegmentation is true?
- A. When enabled, microsegmentation performs distributed switching and routing on the ESXi hosts.
- B. ACI does not support microsegmentation based on vCenter VM attributes. You should use network attributes for mircosegmentation.
- C. Microsegmentation is supported only using AVE or AVS.
- D. An ACI microsegmented EPG automatically creates a port group with a private VLAN configured on a VMware vCenter distributed virtual switch.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/virtualization/Cisco-ACIVirtualizatio
NEW QUESTION # 107
An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning. When creating a solution, the engineer must keep in mind that the tool must support these requirements:
Allow the rapid creation and removal of logical containers.
Support the creation of custom modules and data structures.
Be extensible with external libraries and modules.
Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?
- A. Python
- B. SaltStack
- C. Chef
- D. YAML
Answer: B
NEW QUESTION # 108
Drag and drop the mechanisms to collect data from a network from the left onto their characteristics on the right
Answer:
Explanation:
Explanation
Table Description automatically generated with low confidence
NEW QUESTION # 109
An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?
- A. Interface ethernet 1/2
Ip ospf network point-to-point - B. interface ethernet 1/2
ip ospf passive-interface - C. interface ethernet 1/2
passive-interface default - D. interface ethernet 1/2
no ip ospf passive-Interface
Answer: B
NEW QUESTION # 110
An engineer evaluates a UI-based infrastructure management system capable of monitoring and deploying standardize VXLAN BGP EVPN deployments. The storage administrator else need the solution to manage the cisco MDS 9090 series Switches. Which solution meets these requirements?
- A. Tetration
- B. UCSD
- C. DCNM
- D. Intersight
Answer: C
NEW QUESTION # 111
An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?
- A. Configure the legacy and precision boot order to be mutually exclusive.
- B. Set the boot configuration directly through BIOS.
- C. Apply UEFI Secure Boot for a nonsupported operating system.
- D. Enable the system to boot with the configured boot order.
Answer: B
Explanation:
Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_G
NEW QUESTION # 112
Refer to the exhibit.
What is configured as a result of running these commands?
- A. loose unicast RPF
- B. reverse lookup for outbound packets
- C. IP Source Guard
- D. strict unicast RPF
Answer: D
Explanation:
https://tools.cisco.com/security/center/resources/unicast_reverse_path_forwarding The ip verify unicast source reachable-via rx command enables Unicast RPF in strict mode. To enable loose mode, administrators can use the any option to enforce the requirement that the source IP address for a packet must appear in the routing table.
NEW QUESTION # 113 
Refer to the Exhibit.
An engineer is connecting a Cisco MDS 9700 series multilayer director to a downstream Cisco Nexus 5672UP switch. Which command set must be used to complete the configuration?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: D
NEW QUESTION # 114
The VMM domain is integrated between Cisco APICs and vCenter using a distributed vSwitch. The traffic must be blocked between a subset of endpoints in an EPG based on specific VM attributes and the rest of the VMs in that EPG. Which set of actions blocks this traffic?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: D
NEW QUESTION # 115
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)
- A. Configure the switchport mode SD under interface tc2/1.
- B. Configure the switchport mode SD under interface fc2/2.
- C. Configure switchport speed 4000 under interface fc2/2.
- D. Configure session type fc under monitor session 1.
- E. Configure the switchport monitor under interface fc2/2
Answer: C,E
NEW QUESTION # 116
The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: C
Explanation:
"mod all" is incorrect. "mod 1test" is incorrect. "publish event" is incorrect.
"mod 1 test" is correct. It is with "policy-default".
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/system-management/guide/ b_Cisco_Nexus_7000_Series_NX-OS_System_Management_Configuration_Guide-RI/ configuring_online_diagnostics.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/system-management/bcisco- nexus-9000-series-nx-os-system-management-configuration-guide-93x/b-cisco-nexus-9000-seriesnx- os-system-management-configuration-guide-93x_chapter_011010.html
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-3234.pdf
NEW QUESTION # 117
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
- A. free up space on the USB3 device by deleting old Cisco NX-OS image files
- B. back up the configuration
- C. make the primary supervisor the active supervisor
- D. disable Cisco Fabric Services
- E. check the impact of the upgrade using the show install all impact command
Answer: B,E
NEW QUESTION # 118
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
- E. Option E
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/421_n1_1/ b_Cisco_n5k_fcoe_config_gd_re_421_n1_1/Cisco_n5k_fcoe_config_gd_re_421_n1_1_chapter4.html
NEW QUESTION # 119
A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2. Which two configuration sets must be used to meet these requirements? (Choose two.)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
- E. Option E
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/ configuration/guide/sm_nx_os_cli/sm_2cfs.html
NEW QUESTION # 120
After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced. Which two actions must be taken to meet this requirement before the isolated device is reloaded'?
(Choose two)
- A. Set the vPC MAC address to a tower value than the peer
- B. Configure auto-recovery to the disable state on both peers
- C. Set the vPC MAC address to a higher value than the peer
- D. Change the vPC system-priority of the replacement chassis to a higher value than the peer if.
- E. Change the vPC system-priority of the replacement chassis to a lower value than the peer.
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_C
-------
https://community.cisco.com/t5/networking-documents/vpc-auto-recovery-feature-in-nexus-7000/ta-p/3123651
NEW QUESTION # 121
A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources. Drag and drop the descriptions from the left onto the appropriate.
Answer:
Explanation:
NEW QUESTION # 122
Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not all features are used
Answer:
Explanation:
NEW QUESTION # 123
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 124
A company is investigating different options for IT automation tools. The IT team has experience with python programming language and scripting using a declarative language. The proposed tool should be easy to set up and should not require installing an agent on target devices. The team will also need to build custom modules based on the python programming language to extend the tools functionality. Which automation tool should be used to meet these requirements?
- A. NX-API
- B. Ansible
- C. Puppet
- D. Chef
Answer: B
NEW QUESTION # 125 
Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Series Switch. What is displayed when this command is executed?
- A. impact of a software upgrade in ISSU and chassis reload
- B. compatibility of software in the system bootflash file
- C. features that are enabled automatically after the downgrade
- D. features and commands that are removed automatically from the configuration
Answer: B
NEW QUESTION # 126
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal? (Choose two.)
- A. Device aliases
- B. Port security
- C. Auto-learning
- D. Enhanced zoning
- E. Smart aliases
Answer: B,C
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/psec.html
NEW QUESTION # 127
......
Latest 100% Passing Guarantee - Brilliant 350-601 Exam Questions PDF: https://www.testpassed.com/350-601-still-valid-exam.html
350-601 Certification – Valid Exam Dumps Questions Study Guide: https://drive.google.com/open?id=1dYxST2rIXlMAi6VJjpZchYrg0_PvDC-r